How to replace the tablet.

Issue

How to replace the tablet of Smart Construction 3D Machine Guidance.

How to deal

1) Set the Wi-Fi network connection of the new tablet to the target controller serial number "Retro- 

    48A*********".

2) Download the design data from the project file.

3) Check the accuracy of cutting edge is good or not.

Explanation

• The SSID is "Retro-48A*********" which is the same as the controller serial number.
  　PASS is set to "*********A84", which is a character string reading 48A backwards.
• The vehicle calibration information, GNSS setting information (Ntrip setting, etc.) and bucket files are stored in the controller and will not be changed even if the tablet is replaced.
• Payload calibration information settings are saved in the controller if they are set in Ver.0.9.46 or later.
• The design data must be downloaded and set when the tablet is replaced.

serial number