On Wednesday, April 9, 2025, Smart Construction Pilot (tablet app) v1.0.11 will be released via Google Play.

Smart Construction Pilot 1.0.11 Updates

1. Support for Tiltrotator Bucket

The tiltrotator bucket is now available.

Please refer to the manual for details on settings and configurations. 　 Important 　 Additional hardware is required to make the function work. Please update the controller firmware to v2.3.4 or later. Supports Steelwrist tiltrotator buckets. (Engcon and Rototilt can be selected in the app, but they are not yet supported at this time.)
Guidance Display	Tiltrotator Bucket Calibration Display

2. Viewpoint Changes in Section View (Tilt Bucket & Tiltrotator Bucket)

You can now choose between two view modes for the front view of the bucket:

Important 　 This setting can be changed when using a tilt bucket or tiltrotator bucket. How to Switch the Setting. Menu → Guidance Settings → Application Settings → View Mode (within the Section View Screen tab)
Horizontal(Default) The camera now moves with the bucket link as the center The camera is positioned at the front of the bucket	Tracking The camera now moves with the bucket link as the center The camera is placed in a position where the side of the bucket is not visible

3. Viewpoint Changes in Profile View (Tilt Bucket & Tiltrotator Bucket)

You can now choose from three view modes for the side view of the bucket:

Important 　 This setting can be changed when using a tilt bucket or tiltrotator bucket. How to Switch the Setting. Menu → Guidance Settings → Application Settings → View Mode (within the Profile View Screen tab)
Tracking(Default)	Horizontal	Bucket Side

4. Payload Meter - Main Display Design improvement

The payload screen design will be updated.

Please refer to the manual for details on button layout and other changes.

5. Payload Meter - Added Function to Use Set Height Passage as Loading Trigger

Added a function to determine loading based on set height passage. Now, the payload value can be determined without rotating.

How to Switch the Setting. Menu - Basic Settings - Fix With Bucket Height When tapping the height setting button, the arm tip height at that moment is set as "0" on the loading gauge. The payload value is determined when the set loading height is passed. Please refer to the manual for details on settings and configurations.

6. Added Height Difference Display to 3D View

Height difference display is now available in 3D view, just like in Section and Profile views.

7. Other updates and fixes

[Machine Guidance] Modified the threshold for creating design surfaces from linework so that the user can change it.
[Machine Guidance] Added Hungarian language support.
[Machine Guidance] Fixed a bug where the “ratio” and “%” values for the slope of the simplified design surface changed between creation and editing.

Tablet App v1.0.11 will be released