Daigo
- Total activity 75
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 2
- Subscriptions 39
Articles
Recent activity by Daigo-
How to use the ２D machine Guidance
Introduction This article provides a detailed explanation on how to generate a target surface from the posture of the vehicle body and construct it without using GNSS.This method is expected to be ...
-
How to customize the data display on the guidance screen
Introduction This article provides a detailed explanation on how to customize the data display on the guidance screen.The operator can arbitrarily change the display format to whatever he/she wishe...
-
How to change the screen split/layout
Introduction This article provides a detailed explanation on how to change the screen layout of the 3DMG construction machine used.The operator can arbitrarily change the viewpoints he/she wishes t...
-
How to set up and use the compass function
Introduction This article provides a detailed explanation on how to check if the machine is facing the design surface.Using the compass display, you can ensure that you are facing the surface to be...
-
Inaccuracy of cutting edge
Issue The cutting edge deviates significantly from the benchmark coordinates when checking the accuracy of the cutting edge. (The difference from the control point is large in the cutting edge posi...
-
How to display the bucket angle to the design surface
Introduction This article provides a detailed explanation on how to display the bucket angle relative to the target surface on the guidance screen.By displaying the bucket angle, you can check the ...
-
Recommended settings for a tablet.
Introduction This article provides a detailed explanation on how to set the recommended settings for Android tablets. The recommended settings are expected to improve the operability and long-term ...
-
How to set up for Payload Meter in a tablet
Introduction This article details how to set up a construction machine equipped with Retrofit to display the weight of excavated soil on a tablet and manage loading.By displaying and managing the w...
-
How to perform bucket calibration
Introduction This article provides a detailed explanation on how to calibrate the buckets used in 3DMG.When using 3DMG, the bucket of the machine to be used must be calibrated in advance to manage ...
-
How to manage the amount of soil to be hauled and the loading
Introduction This article provides a detailed explanation on how to set up the machine equipped Retrofit for the job site manager to manage the operator's loading and hauling dump trucks.By display...