【Smart Construction Pilot 】 タブレットアプリ v1.0.07 リリース

On Wednesday, April 3, 2024, Smart Construction Pilot (tablet app) v1.0.07 will be released via Google Play.

Smart Construction Pilot 1.0.07 Updates

1. Measuring bucket angles "a" and "b" without digital spirit level

2. [Payload] Addition of confirm button for Accuracy check mode

3. Sensor Data Monitoring screen

4. Improvement for tilt bucket calibration

5. System Log Upload

6. Other updates and fixes

---

1. Measuring bucket angles "a" and "b" without digital spirit level

When calibrating a bucket, it is now possible to measure bucket angles "a" and "b" without digital spirit level.

**Important**　 Perform bucket calibration with the machine on stable ground when measuring bucket angles "a" and "b". Edit button will be activated after inputting the length of "A"

---

2. [Payload] Addition of payload confirmation button

Payload can now be determined by tapping a button without a bucket dump.

	Accuracy check can now be performed without dumping the bucket when checking the accuracy of weights placed in the bucket. 　**Important**　 If you tap the activated confirm button , you can complete accuracy check.

---

3. Sensor Data Monitoring screen

The values of latitude and longitude, angles such as work equipment/machine body can now be checked in real time.

Please use for diagnosis and other purposes. This menu can be accessed from: Menu System Configuration Sensor Data Monitoring

---

4. Improvement for tilt bucket calibration

Changed IMU calibration flow when tilt bucket editing.

When editing only the bucket name or shape, it will no longer transition to the tilt bucket IMU settings screen. If you need to re-calibrate the tilt bucket IMU, tap "Tilt IMU Calibration" to perform the calibration.

---

5. System Log Upload

Log data in the tablet can now be sent to the server.

When a problem occurs, sending the system log in the tablet to the server allows for detailed investigation. This menu can be accessed from: Menu System Configuration System Log Upload

---

6. Other updates and fixes

• If a sensor is not connected, display a caution and turn off the sensor enable.

• Support for Portuguese.

• [Machine Guidance] Change the default value of Maxim Baseline according to the region.

• [Machine Guidance] Heading Unusable Error Delay Time can now be set in Application Settings.

  The error will not be displayed for the set time (0-3 seconds)

• [Machine Guidance] Fix a bug that specific control points causing the machine to shake in Guidance View.

• [Payload] Payload correction value B is saved in bucket file.

• [Payload] Added system management menu.

• [Payload] Changed the wording of "Low accuracy" under the current excavation volume.

• [3DMG Basic] Added a toggle button to the common settings screen to control ON/OFF.