On Wednesday, September 18, 2024, Smart Construction Pilot (tablet app) v1.0.09 will be released via Google Play.
Smart Construction Pilot 1.0.09 Updates
1. Improved bucket selection and change methods
2. Display of the name of the design surface in use
3. Tap a truck during loading to start a new load
1. Improved bucket selection and change methods
| After selecting a bucket, if you tap the ✓ button, the message "Do you want to use the selected bucket file?" will be displayed and you can choose whether to switch. |
| Bucket attachment button To select or change the bucket, ① Select a bucket that you want to use ② Tap the checkmark at the bottom right of the screen ③ Tap the checkmark in the dialog to change the bucket |
2. Display of the name of the design surface in use
| The name of the design surface in use is now displayed in the footer of the guidance screen. |
| By tapping the red frame in the footer, you can change the displayed content as follows: Bucket angle and distance to the design surface - Bucket name - Design surface name |
3. Tap a truck during loading to start a new load
| Improved so that if you tap a truck in the truck list even while loading, finish loading and a new loading will start on the selected truck. |
|
Important ・The function is enabled when auto start is ON. ・You cannot select a truck for 5 seconds after loading starts. |
-
[Machine Guidance / Payload Meter]Support for Android 14
-
[Machine Guidance / Payload Meter]Support for Thai, Indonesian and Turkish
-
[Machine Guidance / Payload Meter]Rotate the app display 180° depending on the orientation of the tablet
-
[Machine Guidance]Modified so that topographic survey points can be sent to the server in any project
-
[Machine Guidance]Default target surface offset direction changes depending on region
-
[Machine Guidance]Fixed an issue where an error occurred when retrieving the mount point from a specific Ntrip Caster
-
[Machine Guidance]Fixed an issue where the height display of the simple design surface changed in certain cases
-
[Machine Guidance]Fixed an issue where the cutting edge icon in the section view was also hidden when the operation indicator was turned off
-
[Machine Guidance]Fixed an issue where the bucket width line was hidden in the heatmap
-
[Machine Guidance]Fixed an issue where design data was displayed even though it was out of 3D design data range in the section view
Comments
0 comments
Article is closed for comments.