Daigo
- Total activity 75
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 2
- Subscriptions 39
Articles
Recent activity by Daigo-
Inaccuracy of cutting edge
Issue The cutting edge deviates significantly from the benchmark coordinates when checking the accuracy of the cutting edge. (The difference from the control point is large in the cutting edge posi...
-
How to display the bucket angle to the design surface
Introduction This article provides a detailed explanation on how to display the bucket angle relative to the target surface on the guidance screen.By displaying the bucket angle, you can check the ...
-
How to set up for Payload Meter in a tablet.
Introduction This article details how to set up a construction machine equipped with Retrofit to display the weight of excavated soil on a tablet and manage loading.By displaying and managing the w...
-
How to perform bucket calibration
Introduction This article provides a detailed explanation on how to calibrate the buckets used in 3DMG.When using 3DMG, the bucket of the machine to be used must be calibrated in advance to manage ...
-
How to manage the amount of soil to be hauled and the loading.
Introduction This article provides a detailed explanation on how to set up the machine equipped Retrofit for the job site manager to manage the operator's loading and hauling dump trucks.By display...
-
How to create the project for 3DMG machine
Introduction This article provides a detailed explanation on how to create a project for 3DMG construction machine.By linking the 3DMG machine and bucket files that you own to the created project, ...
-
How to create and transfer data files for 3DMG machine
Introduction This article provides a detailed explanation on how to create and transfer a construction data file for use on a 3DMG construction machine.The created construction data file can be tra...
-
How to set up a restricted area within the jobsite using a geofence (PilotWEB setup)
Introduction This article provides a detailed explanation on how to set up contact hazard areas and deviation prevention areas (geofences) on the construction site in PilotWEB and share them with 3...
-
How to check relation information of 3DMG on the web site
Introduction This article provides a detailed explanation on how to properly manage and check the related data of your 3DMG construction equipment on the web.You can manage the status of constructi...
-
Error message " ** AWAY FROM BASE STATION" is displayed.
Issue The Pilot screen on the tablet displays " ** AWAY FROM BASE STATION". Answer/Cause The distance from the point that delivers the correction information exceeds the value set in the applicat...