Daigo
- Total activity 83
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 2
- Subscriptions 37
Articles
Recent activity by Daigo-
How to display the bucket angle to the design surface
Introduction This article provides a detailed explanation on how to display the bucket angle relative to the target surface on the guidance screen.By displaying the bucket angle, you can check the ...
-
How to set up for Payload Meter in a tablet.
Introduction This article details how to set up a construction machine equipped with Retrofit to display the weight of excavated soil on a tablet and manage loading.By displaying and managing the w...
-
How to perform bucket calibration
Introduction This article provides a detailed explanation on how to calibrate the buckets used in 3DMG.When using 3DMG, the bucket of the machine to be used must be calibrated in advance to manage ...
-
How to manage the amount of soil to be hauled and the loading.
Introduction This article provides a detailed explanation on how to set up the machine equipped Retrofit for the job site manager to manage the operator's loading and hauling dump trucks.By display...
-
How to create the project for 3DMG machine
Introduction This article provides a detailed explanation on how to create a project for 3DMG construction machine.By linking the 3DMG machine and bucket files that you own to the created project, ...
-
How to create and transfer data files for 3DMG machine
Introduction This article provides a detailed explanation on how to create and transfer a construction data file for use on a 3DMG construction machine.The created construction data file can be tra...
-
How to set up a restricted area within the jobsite using a geofence (PilotWEB setup)
Introduction This article provides a detailed explanation on how to set up contact hazard areas and deviation prevention areas (geofences) on the construction site in PilotWEB and share them with 3...
-
How to check relation information of 3DMG on the web site
Introduction This article provides a detailed explanation on how to properly manage and check the related data of your 3DMG construction equipment on the web.You can manage the status of constructi...
-
Error message " ** AWAY FROM BASE STATION" is displayed.
Issue The Pilot screen on the tablet displays " ** AWAY FROM BASE STATION". Answer/Cause The distance from the point that delivers the correction information exceeds the value set in the applicat...
-
Unable to send projection information (web version)
Issue Projection information cannot be sent from Smart Construction pilot (WEB) to the tablet. Cause There is a possibility that the Internet communication environment is poor or that the setting...