How to resolve error: "The license for Machine Guidance is not set."

Please follow these steps:

1. Turn on Controller FIRST – machine key ON.
2. Make sure your tablet is connected to the controller.
   1. controller indicator lanp. 2.4G or 5G should be steady.
   2. tablet should be connected to network named "Retro-48A******".
3. Launch Pilot application – **if you launch the application without doing step 1 first, these steps will not work. Therefore, if the app was open before the controller was completely on, please force close the app and then re-launch.
4. If Wi-Fi doesn't have active SIM card, please connect the tablet to internet. If it has, you can go step5.
5. Make sure the tablet is connected to the internet as it will automatically obtain the license information from the server.
6. Click the gear icon at the bottom of the blue screen.
7. Hit "License" button. The license info should show up now.
   **If it does not show up, please hit the cloud button in the bottom left corner.
8. you should be able to launch "3D machine guidance" or "payload" 

If it does not work, it means the controller does not have lisence.

getting temporary license is the tentative way.

how to do

please follow these steps below as accurately, as possible:

1. Turn on Controller FIRST – machine key on
2. Make sure the to connect the tablet to the controller
   1. controller indicator lanp. 2.4G or 5G should be steady.
   2. tablet should be connected to Wi-Fi named "Retro-48A******".
3. Launch pilot application – if you launch the application without doing step 1 first, the workflow will not work properly. Therefore, if the app was launched before the controller was completely on, please force close the app and re-launch the app.
4. The blue screen shows up which is okay, the tablet is getting the controller info and writing on the tablet
5. Connect the tablet to internet
6. Click the gear icon at the bottom of the blue screen
7. Hit "License" button. 
8. hit "license request" button
9. put password A "31415"
10. hit "✓" button on following message
11. hit "cloud" icon
12. you will see "temporary" on your screen
13. you should be able to launch "3D machine guidance" or "payload" 
14. please end the controller serial number to us. the temporary license will be expired one week later. we will submit permanent license to your controller