How to display the cutting edge height as an elevation value.

Introduction

This article provides a detailed explanation on how to display the distance of the cutting edge to the design surface as an elevation value.
In the section view, the cutting edge to the design surface can be displayed as an elevation value.

Procedures and Explanation

1. Select 【"1"the gear mark】 and 【"2"Guidance Settings"】 and tap 【"3"Application Settings】.

2. Find "Section View Screen" in "Application settings" and turn 【"1"Elevation】 ON.
*You can also turn on 【"2"Distance to the design surface】 in this screen to display the height to the design surface.

3. Tap 【"1"the menu】, then touch 【"2"the view switching button】 to change the layout.

4. The elevation value is displayed in the section view.

• Distance from the design surface: Red frame
• Elevation: Blue frame