okamura
- Total activity 9
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by okamura-
okamura created an article,
The picture of the machine on the tablet faces 180° in the opposite direction.
Issue The picture (illustration) of the machine displayed on the tablet is facing 180° in the opposite direction. Answer/Cause It occurs when the left and right antennas are recognized backwards. ...
-
okamura created an article,
Tablet goes to sleep by itself.
Issue Tablet goes to sleep by itself Answer/Cause Please turn off the screen off setting of the tablet. How to deal/Explanation The tablet is designed not to sleep when using SMART CONSTRUCTIO...
-
okamura created an article,
How to display a dump on the payload without linking with Smart Construction Fleet.
Issue For running a test, want to know how to display a dump on the payload meter without linking with Smart Construction Fleet. How to deal You can display a test dump by turning on the standalo...
-
okamura created an article,
How to change the length of the worn out tooth.
Introduction This article provides a detailed explanation on how to change the tooth length on the data in the guidance screen when the bucket tooth in use are worn.By adjusting the tooth length, y...
-
okamura created an article,
What is the Max Grade Transition?
Question There is a setting called "Max Grade Transition" in Smart Construction 3D Machine Guidance, what does it mean? Answer It is a setting that allows to expand the selection area of the TI...
-
okamura created an article,
Sudden voice message from the tablet and limited screen operation.
Issue Sudden voice message is played from the tablet and screen operation is not working properly. When touching the screen, a green frame appears where touched. Answer/Cause The tablet's Talk...
-
okamura created an article,
How to set up a bucket exchange when the machine is using a payload option.
Issue How to set up a bucket exchange when the machine is using a payload option. Answer Enter the bucket weight in the payload machine settings screen of the Smart Construction Pilot. Explanati...
-
okamura created an article,
Unable to change and release the field of machine.
Issue When using Smart Construction 3D Machine Guidance, a machine has to be registered to a site on the web version of Smart Construction Pilot, but it is not possible to cancel the registration o...