okamura
- Total activity 9
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Articles
Recent activity by okamura-
How to change the length of the worn out tooth.
Introduction This article provides a detailed explanation on how to change the tooth length on the data in the guidance screen when the bucket tooth in use are worn.By adjusting the tooth length, y...
-
The picture of the machine on the tablet faces 180° in the opposite direction.
Issue The picture (illustration) of the machine displayed on the tablet is facing 180° in the opposite direction. Answer/Cause It occurs when the left and right antennas are recognized backwards. ...
-
Tablet goes to sleep by itself.
Issue Tablet goes to sleep by itself Answer/Cause Please turn off the screen off setting of the tablet. How to deal/Explanation The tablet is designed not to sleep when using SMART CONSTRUCTIO...
-
Unable to change and release the field of machine.
Issue When using Smart Construction 3D Machine Guidance, a machine has to be registered to a site on the web version of Smart Construction Pilot, but it is not possible to cancel the registration o...
-
How to set up a bucket exchange when the machine is using a payload option.
Issue How to set up a bucket exchange when the machine is using a payload option. Answer Enter the bucket weight in the payload machine settings screen of the Smart Construction Pilot. Explanati...
-
Sudden voice message from the tablet and limited screen operation.
Issue Sudden voice message is played from the tablet and screen operation is not working properly. When touching the screen, a green frame appears where touched. Answer/Cause The tablet's Talk...
-
How to display a dump on the payload without linking with Smart Construction Fleet.
Issue For running a test, want to know how to display a dump on the payload meter without linking with Smart Construction Fleet. How to deal You can display a test dump by turning on the standalo...
-
What is the Max Grade Transition?
Question There is a setting called "Max Grade Transition" in Smart Construction 3D Machine Guidance, what does it mean? Answer It is a setting that allows to expand the selection area of the TI...