Issue
For running a test, want to know how to display a dump on the payload meter without linking with Smart Construction Fleet.
How to deal
You can display a test dump by turning on the standalone mode.
Explanation
- Touch the gear symbol in the lower left corner on payload meter display.
- Select "Basic Settings."
- Press the machine symbol.
-
Enter the password "31415."
-
Touch the check mark.
-
Turn on "Standalone mode" on the machine settings screen
- Touch the check mark in the lower right corner.
- After returning to the basic settings screen, tap the check mark in the lower right corner again.
- Please confirm that the dump named "Default Dump" is displayed.
This method enables loading operation, but does not allow you to manage the results because they are not sent to the Smart Construction Fleet. Please use this method when you want to try it out.
Comments
0 comments
Please sign in to leave a comment.