Introduction
This article provides a detailed explanation on how to properly manage and check the related data of your 3DMG construction equipment on the web.
You can manage the status of construction equipment, use data in case of trouble, and output and use valid data from the Web.
Procedures and Explanation
1. Open Smart Construction Pilot Web and click 【”1"the machine】 icon
2. Search by serial number of the machine or controller for which you want to check the setting information, and click 【"1"the construction machine】 that hits the search.
3. Click each icon to output related data as needed.
What is 【"1"related data】?
Configuration info, Controller info, Accuracy Check, Calibration info
Basic info, Error info, and Topography survey are included.
Supplementation
The downloaded data contains the configuration information that has been stored in the tablet application and can be checked by opening it in "Memo" or other applications.
Stored information | |||
Update date/time (UTC) | Name of bucket file | Name of project file | Name of design plane |
Offset type (Perpendicular or Vertical) |
Offset value | Matching value | X=E Y=N Z=Z |
Correction information type | GNSS Type | Satellite mask angle | |
Server Name | Server Name URL | Port No. | |
User ID | Mount point | Wireless communication speed | |
Tablet model name | OS version | Application version |
The setting information in the controller is stored, and it can be checked by opening it with "Memo" etc. when downloading.
Stored information | ||
Creation date/time (UTC) | Update date/time (UTC) | Controller information |
Controller information Manufacturer and model |
Controller information Firmware version |
GNSS receiver Main/Sub Each model/version |
Each IMU sensor Manufacturer/model/ version |
You can download the results of the cutting edge confirmation on the machine guidance.
1) Tap the icon below to measure 【"1"the cutting edge position】.
2) The results can be 【"1"downloaded】 in CSV format on the web.
The calibrated data will be stored.
When replacing the controller, the data from that time can be used for restoration, etc.
Contains information set in the controller
Information on error signals from connected sensors/harness cables and connection errors in GNSS or with the controller are stored.
You can download the results of measuring the terrain with the cutting edge on the machine guidance.
1) Tap the 【"1"icon】 below to measure 【"2"the terrain at the cutting edge】.
2) The results can be 【”1"downloaded】 in CSV format on the web.
Supplementation
How related data is stored
After receiving the product set from the distributor, the administrator logs into the Customer Portal, starts Smart Construction Pilot from the application list, and confirms that the controller information (construction machine) is reflected in his/her company.
Comments
0 comments
Please sign in to leave a comment.